Quick Search: Hit CONTROL-F to search THIS page with your browser!
Welcome To The Sphere Research Canadian Test Equipment Site !
RF / Microwave Scalar + Vector Network Analyzers
*Updated Regularly
Click REFRESH on your browser if pages seem unchanged

Click to Visit Sphere's Home Visit the Document Server! Visit our amazing document server. Everything from Quotes and SciFi to Ethics and Business.
* Want something? Click here to e-mail an order to us!
Sphere Research Coporation, CLICK to visit!
Please Note:
All Prices are in US$
Sphere Research Corporation
3394 Sunnyside Rd.
West Kelowna, BC, Canada V1Z 2V4
Phone: +1 (250) 769-1834
FAX:+1 (250) 769-4106

A great source for test equipment, repairs, calibrations, useful metrology information, and of course, SLIDE RULES!

JUST SCROLL DOWN TO SEE EVERYTHING !
 
CLICK to see Parts By the FootCLICKCLICK to SEE!
 Parts by the Foot!
Now OPEN, our PRODUCTION PARTS WAREHOUSE
Literally millions of parts available at great prices!
CLICK to visit the parts warehouse! CLICKCLICK HERE
CLICKTo Visit The Parts Section
PM 1038-D14 Scalar Analyzer
Test Equipment Navigation
return home
Go to the Sphere FAQ Go to Sphere's FAQ Page
TEKTRONIX
Used Tektronix
Equipment

Go to the Tek EquipmentEquipment
Go to the Tek Cross-reference DataCross-Ref Data
Go to the Tek CRT DataCRT Data
Go to the Tek PartsParts
Hewlett-Packard
Used HP
Equipment

Go to the HP EquipmentEquipment
Go to the HP Cross-reference DataCross-Ref Data
Go to the HP CRT DataCRT Data
Go to the HP PartsParts
PHILIPSFLUKE
Used Fluke + Philips
Equipment

Go to the Fluke EquipmentEquipment
Go to the Fluke PartsParts
Go to the Fluke/Philips CRT DataCRT Data
GENRAD
Used General Radio
(Genrad) Equipment

Go to the GenRad EquipmentEquipment
NEW STUFF, CLICK to see!NEW STUFF, CLICK to see!NEW STUFF, CLICK to see!
Go to the NEW STUFF!Lots of NEW Arrivals!
Go to the HOT Deals!Go to the HOT Deals!Go to the HOT Deals!
Go to the NEW STUFF!Assorted HOT Deals!
*Optics*
Used Optics
Equipment
CLICK to go to the Power Supplies
Go to the Power SuppliesPower Supplies
CLICK to go to the RF/Microwave Parts
Go to the RF/Microwave PartsRF/Microwave Parts
TUBETUBETUBETUBETUBETUBE
Go to the Nixie TubesVacuum Tubes
CLICK to go to the Nixie Tubes
Go to the Nixie TubesNixie Tubes
CLICK to go to the CRT's
Go to the Cathode Ray Tubes (CRT's)Standard CRT's

Go to the Tek Cathode Ray Tubes (CRT's)Tektronix CRT's
Go to the -hp- Cathode Ray Tubes (CRT's)- hp - CRT's
Visit classic old gear from Long Ago!
Visit Other Manufacturer's Equipment, NOT Tek, Hp, Fluke GenradVisit the Semiconductors
Visit the computer/microcontroller related itemsVisit the Telecom Section
SLIDE RULESGo to the Slide RulesSlide Rules !
Marketplace Navigation
return home
Go to the Sphere FAQ Go to Sphere's FAQ Page
PM-1038-D14/A RF and
Microwave
Vector and
Scalar
Analyzers


go right to the catalog! Skip the INTRO, Go RIGHT to the CATALOG!
These are the RF Network Analyzers we have, both Scalar (Power vs. Frequency) and Vector (Power and Phase vs. Frequency). We have many accessories and fixtures, sensors, plug ins and mainframes. We are happy to help you put together any system you want, just email with your requests.

Interested in RF Semiconductors (Transistors and ICs)? CLICK HERE.
Interested in RF Diodes (Varactors, PINs, Mixers)? CLICK HERE.
Interested in RF Crystals, Filters and Oscillators?
CLICK HERE.


* NAVIGATION: To make your life easier, and help you find exactly what you want, we have broken the on-line equipment catalogs into smaller sections. Just CLICK on the item you are looking for at the left, to see the matching catalog. Large graphical catalogs are a bit SLOW, so please give them a bit of time to load. The top header of each catalog is largely the same, so don't think you are stuck in one place!

You can order anything here just by picking up the phone, and calling (250) 769-1834 during normal office hours, 8:30AM to 4:30PM PST, or FAX to (250) 769-4106. OR, Email your order to Susan CLICKHERE.

Shipping*SHIPPING: Preferred and Alternate Methods as of June 4, 2013, CLICK for FULL DETAILS ON OUR FAQ Page. Rates are now changing rapidy, often with little notice to us, so all the data has been transferred to the FAQ page for speedy updating.

* E-Mail Susan if you want a quote for shipping to other destinations, or for something heavy. Sorry, we can't safely send most individual small parts in a regular letter envelope, they get destroyed by the automated handling equipment. Sometimes we can ship very rugged parts in a small padded envelope by letter post. Ask Susan.

*There is a packing charge for large or heavy equipment, see the FAQ for details.

*If we have your valid data on file, you can just click on the ORDER email link to place an order and indicate your approval to bill, and we will do the rest. We keep your active information for ONE YEAR for your convenience.

*If this is the first time you have dealt with us, you can phone +1 (250) 769-1834 or FAX +1 (250) 769-4106 to supply the billing info, or send it by the email link, as you prefer. We accept VISA/MC, international money order, Paypal (to Susan@Okanagan.net), and bank wire transfer. Please note that there are transaction fees with Paypal and wire transfer payments, the wire transfer fee is frankly horrifying.

We accept VISA/MC or international money order

* CONDITION: To answer your questions, YES, we completely check and inspect all used equipment, and do not offer any we feel is substandard. That gear is normally scrapped, broken down for parts, or may get offered as-is in the HOT DEALS section, with the unit's condition clearly identified. If there are any marks or detracting features, we clearly state them in the listing. Before shipment, we burn in the equipment for 24 hrs. again and re-check to be sure it is good prior to shipment.

* The CATALOG will appear below shortly!
Don't forget these illustrated sections take a few seconds to load, but they are worth the wait!
Email US! Want something? Click here to e-mail us!
We accept Visa / MC for fast order processing.


More RF Parts on the Site!
RF Diodes
RF DIODES, CLICK to SEE!
CLICK to see!
RF Transistors/ICs

RF TRANSISTORS and ICs, CLICK to SEE!
CLICK to see!
RF Components

RF PARTS, CLICK to SEE!
CLICK to see!
RF Tubes

RF TUBES, CLICK to SEE!
CLICK to see!
RF Power Meters
RF Powermeters, CLICK to SEE!
YOU ARE HERE!
CATALOG: JUST SCROLL DOWN TO SEE EVERYTHING !down
PM-1038-D14, CLICK for bigger PIC!
Pacific Measurements
PM / Wavetek 1038-D14 Series
RF Scalar Analyzers
and Sensors to 26.5Ghz

Very popular Scalar Analyzers, they accept up to 3 sensors, and display 2 channels of level data, which can be corrected against a reference channel. The 1038-D14 has real time analog operation and digital storage (allows very slow sweeps and trace comparison), and with suitable external sweep generators like the HP 8620C, and the correct sensors, provides full S-parameter analysis at full microwave frequencies. Built in front panel calibrator and accessory storage drawer. XY recorder outputs at rear. Accepts many plug in styles for high versatility. All frames are calibrated with the C10 factory calibration fixture.
PMI/Wavetek Sensors
CLICK for bigger PIC
CLICK for Bigger PIC!

Measuring
RETURN LOSS

CLICK for Bigger PIC!
CLICK for Bigger PIC!
Measuring
INSERTION LOSS

CLICK for Bigger PIC!
CLICK for Bigger PIC!
Measuring
RETURN LOSS

CLICK for Bigger PIC!
CLICK for Bigger PIC!
Measuring
INSERTION LOSS

CLICK for Bigger PIC!
CLICK for Bigger PIC!
Measuring
BOTH

CLICK for Bigger PIC!
CLICK for Bigger PIC!

Pacific Measurements

PM/Wavetek
1038-D14
Scalar Aanalyzer

c/w H13/V13 Plug-ins
PMI 1038 high performance scalar analyzer, equipped for 18Ghz operation with 3 plugs ins (H13, V13, V13), 2 ea. 13782 sensors. The H13 has a +10dBm RF calibrator source (front panel) for system set up.
Fully overhauled, drift tested and frame calibrated with C-10 factory reference fixture. Available with several sensor/cable systems, see below for additional sensors. Ideal for use with microwave sweep generators like the HP 8620C, Weinschel 430 series, and Wiltron 610D and similar units.
Supports both high speed logarithmic readings in dB and dBm, plus relative reference operation in several modes and display/offset factors. Extremely flexible and powerful, ideal for combined return loss, passband and power measurements with directional couplers. Individual sensor calibration provided at each plug in. Most companion sensors can provide at least 50dB and often up to 60dB of stable dynamic range.
Includes:
H13 or H12 Horizontal Plug-in
V13 or V12 Vertical Plug-in (depending on availability)
V13 Vertical Plug-in
2 ea. 13782 Sensors (Type N(m)) c/w cables (1Mhz to 18Ghz)

Important! to get the best performance from all sensor based power/analyzer systems, allow at least a 30 minute temperature stabilization period after power up, and avoid sudden temperature changes at the sensor location. ALWAYS match the sensor to the plug-in, or calibration will be incorrect!
SORRY, SOLD
1Mhz-18Ghz Sensors
2-Channel
DIGITAL STORAGE!




CLICK for bigger PIC!
CLICK for bigger PIC!


CLICK for bigger PIC!
CLICK for bigger PIC!


Can support up to 3 sensors, A, B, Reference. Includes operating manual reprints.
Cal'd$995 complete Checked, Cal'd. Model 1038-D14
PM/Wavetek
Pacific Measurements

PM/Wavetek
Rackmount 1038-D14
Scalar Aanalyzer

c/w H13/V11/V12 Plug-ins
PMI 1038 high performance scalar analyzer, equipped for 18Ghz operation with 3 plugs ins (H13, V11, V12), 1 ea. 13782 sensor. The H13 has a +10dBm RF calibrator source (front panel) for system set up.
Fully overhauled, drift tested and frame calibrated with C-10 factory reference fixture. Available with several sensor/cable systems, see below for additional sensors. Ideal for use with microwave sweep generators like the HP 8620C, Weinschel 430 series, and Wiltron 610D and similar units.
Supports both high speed logarithmic readings in dB and dBm, plus relative reference operation in several modes and display/offset factors. Extremely flexible and powerful, ideal for combined return loss, passband and power measurements with directional couplers. Individual sensor calibration provided at each plug in. Most companion sensors can provide at least 50dB and often up to 60dB of stable dynamic range.
Includes:
H13 Horizontal Plug-in
V12 or V11 Vertical Plug-in, depending on availability
V12 Vertical Plug-in
1 ea. 13782 Sensor (Type N(m)) c/w cable (1Mhz to 18Ghz)

Important! to get the best performance from all sensor based power/analyzer systems, allow at least a 30 minute temperature stabilization period after power up, and avoid sudden temperature changes at the sensor location. ALWAYS match the sensor to the plug-in, or calibration will be incorrect!
SORRY, SOLD
1Mhz-18Ghz Sensor
2-Channel
DIGITAL STORAGE!




CLICK for bigger PIC!
CLICK for bigger PIC!



CLICK for bigger PIC!
CLICK for bigger PIC!


Can support up to 3 sensors, A, B, Reference. Includes operating manual reprints.
Cal'd$995 complete Checked, Cal'd. Model 1038-D14
PM/Wavetek
Pacific Measurements

PM/Wavetek
1038-D14A
Scalar Aanalyzer

c/w N10 Computing Plug-in
PMI 1038 D14A high performance scalar analyzer, equipped for 18Ghz operation with N10 computing plug in with digital display, and 1 ea. 15176 (Tpe N) and 1 ea. 15177 (APC-7) sensors. The N10 has a 0dBm RF calibrator source (front panel) for system set up.
Fully overhauled, drift tested and frame calibrated with C-10 factory reference fixture. The N10 adds direct digital display of power level at the cursor location (see display vertical cursor line) on both A and B channels.
Available with several sensor/cable systems, see below for additional sensors. Both N and APC-& sensors are provides with the system, for maximum flexibility. Ideal for use with microwave sweep generators like the HP 8620C, Weinschel 430 series, and Wiltron 610D and similar units.
Supports both high speed logarithmic readings in dB and dBm, plus relative reference operation in several modes and display/offset factors. Extremely flexible and powerful, especially with built in digital displays, ideal for combined return loss, passband and power measurements with directional couplers. Can also work as a 2 channel stand alone digital power meter (using internal sweep). Individual sensor calibration provided at each plug in. Most companion sensors can provide at least 50dB and often up to 60dB of stable dynamic range.
Includes:
N10 digital display Plug-in
1 ea. 15176 Sensor (Type N(m)) c/w cable (1Mhz to 18Ghz)
1 ea. 15177 Sensor (Type APC-7) c/w cable (1Mhz to 18Ghz)

Important! to get the best performance from all sensor based power/analyzer systems, allow at least a 30 minute temperature stabilization period after power up, and avoid sudden temperature changes at the sensor location. ALWAYS match the sensor to the plug-in, or calibration will be incorrect!
SORRY, SOLD
1Mhz-18Ghz Sensors
2-Channel
DIGITAL STORAGE
DIGITAL DISPLAY!




CLICK for bigger PIC!
CLICK for bigger PIC!


CLICK for bigger PIC!
CLICK for bigger PIC!


Can support up to 3 sensors, A, B, Reference. Provides digital power display on channles A and B of current cursor position. Includes operating manual reprints.
Cal'd$1,495 complete Checked, Cal'd. Model 1038-D14A/N10
PM/Wavetek

IMPORTANT !
Graphical logos and trademarks are the property of their respective owners, including PMI, Wavetek, Tektronix, Fluke, General Radio and Hewlett Packard, and are used here merely to unambiguously identify the products. Sphere Research IS NOT a factory authorized distributor for any of the product lines indicated.

Return Home


E-Mail Us !

Godzilla GraphicsYou are visitor number 36402.
Site Design & contents copyright 1997, 1998, 1999, 2000, 2002, 2003, 2008, 2011, 2013, 2014 by Walter Shawlee 2 & the ad hoc Godzilla Graphics Group.
All rights reserved.