USD $55
A high voltage probe that allows a multimeter to measure up to 6,000V. Intended for low energy applications only. Data sheet available here.
Stock: 1
USD $20
These passive, 1X/10X (6MHz/100MHz), probe comes with a case, data sheet, and accessory kit.
Stock: 2
USD $29
This passive, 1X/10X (100MHz), probe set comes with two probes, manual, and an accessory pack.
Stock: 1
USD $39
This passive, 10x/100MHz, probe kit comes with a case, manual, and accessories.
Stock: 1
USD $25
This probe kit includes two probes, a manual, and an accessory kit (insulating tip, sprung hook, trimmer tool, IC and BNC adapters). These are 1x/10x probes, good to 10MHz and 100MHz respectively.
Stock: 1
USD $150
Horiba ES-12 Conductivity Meter with custom stand assembly
Model: ES-12
MFG No. 311006
Data sheet available here
Stock: 1
USD $50
The TA2K will convert any multimeter with .001 volt DC measurement capability into a dual input temperature tester! Temperature (either ˚F or ˚C), is converted to millivolts and shows up on your DMM display just as it does on a digital thermometer. This adapter plugs directly into DMM’s that use industry-standard 4mm jacks. It includes differential mode, which is great for checking air conditioning system’s superheat and the forward-facing control panel makes changing modes easy.
Stock: 1
USD $15
Technical data is not available on this probe, but it is assumed that its characteristics would be similar to the UEI ATT62 temperature probe.
Stock: 2
USD $15
The UEi ATT62 is a sealed thermistor probe designed for measuring ambient and surface temperatures.
The ATT62 features a 14.8 ft. cable with a 3.5 mm connector plug that is compatible with the following UEi products: DT15A, DT20A, DT40, DTH31
Stock: 1
USD $25
Standard red and black multimeter test leads from Tektronix, no longer in production.
Stock: 1
USD $25
These are standard red and black electrical test leads: 26 Awg, 1200Mm L, 1Kv
Stock: 1
USD $35
The 10600C is a 3.5′ selectable 1x / 10x passive probe, with a readout pin and ground reference selection.
Stock: 2
USD $25
The P2100 is a selectable passive x1 / x10 100 MHz, 600V probe.
Stock: 1
USD $29
The P6100 is a selectable passive x1 / x10 100 MHz, 600V probe.
Stock: 1
USD $15
This is a selectable x1/x10 oscilloscope probe.
Stock: 1
USD $10
This is a very basic x10 passive oscilloscope probe, additional technical details are not available.
Stock: 1
USD $35
The 10006D is a 10:1 voltage divider probe for 1MO inputs.
Stock: 1
USD $35
The PM 6105 is a passive 275MHz x10 probe for oscilloscopes.
Stock: 1
USD $69
The P6058 is a combination 1x DC voltage and temperature measuring device, rated up to 500V. It is designed for use with digital multimeters and plug-ins including the DM501, 7D13, and 7D12/M1, which have a 4-pin LEMO S-series connector for this probe. The temperature sensor is a diode-connected transistor. To measure temperatures, the hook tip is removed from the probe, exposing a ceramic tip connected thermally to the transistor case.
Stock: 1
USD $29
The P6062B is a passive switchable (x1, x10) probe for 1MO scope inputs. It has a readout pin that indicates selected attenuation, and a ground reference button.
Stock: 1
USD $35
The P6101 is a passive 15 MHz, x1, miniature modular probe for 1MO scope inputs.
Stock: 1
USD $44
The P6104 is passive 100 MHz, x10, miniature modular probe for 1MO scope inputs. This probe has a shorter cable than the P6105.
Stock: 1
USD $35
The P6104A is passive 100 MHz, x10, miniature modular probe for 1MO scope inputs. This probe has a shorter cable than the P6105.
Stock: 1
USD $35
The P6105 is passive 100 MHz, x10, miniature modular probe for 1MO scope inputs with a readout encoding pin.
Stock: 1
USD $75
The P6108A is a passive 100 MHz, x10, miniature modular probe for 1 MO scope inputs with a BNC connector and a readout encoding pin.
Stock: 1
USD $35
The P6109 is a 150 MHz x10, 3 m passive probe for scopes like the 2252 with 1 MO inputs. It has a BNC plug witha readout pin.
Stock: 2
USD $39
The P6109B probe is a compatible with most general purpose oscilloscopes that have a 1MO input impedance and bandwidth up to 100MHz. The probe is also compatible with Tektronix oscilloscopes that automatically detect probe attenuation and adjust the scale readout accordingly. The P6109B is a downrated version of the P6109, but covers a larger compensation range.
Stock: 1
USD $35
The P6120 is a 60MHz x10, passive miniature probe, with a BNC connector without a readout pin.
Stock: 1
USD $45
The P6121 is a 100 MHz passive x10 probe designed for the 2236 scope. The P6122 is a general purpose variant.
Stock: 1
USD $25
The P6131 is a passive miniature 300 MHz ×10 scope probe for 1 MΩ // 14-18 pF scope inputs. It has a x10 readout pin, and shares accessories with many other Tektronix subminiature modular probes.
Stock: 1
USD $29
The P6006 is a general-purpose probe designed for use with Tektronix DC to 33 MHz Oscilloscopes. The probe can be compensated to match all Tektronix Plug-Ins and Oscilloscopes with input capacitances of 15 pF to 47 pF and input resistance of 1 MΩ
Stock: 2
USD $45
This 100MHz Texas Instruments probe features a selector switch on the probe body for selecting between 11x and 10x.
Stock: 1
USD $39
This diode connected transistor based temperature probe is designed to be used with digital multimeters and plug-ins (e.g. DM 43 and DM 44). The temperature range is -55C to 150C, with a maximum voltage of 100V.
Stock: 1
USD $69
The Tektronix P6601 is a temperature probe for the DM501A, DM 502A, and 7D13A. The sensing element is a PT100 (100 ? platinum resistor). The probe uses a 2-pin LEMO S-series connector.
Stock: 1
USD $10
Compatible with cat. III and IV standards of 1 000V and 60 V @ 10A.
Stock: 1
USD $10
Compatible with cat. III and IV standards of 1 000V and 60 V @ 10A.
Stock: 1
Sphere Research Corporation