USD $275
Tektronix 2247A 100MHZ Oscilloscope / Counter / Timers
Serial no: B022298
Manual available here
Stock: 1
USD $675
Tektronix TM515 w/Modules
FG501A Function Generator, SC503 10MHz Storage oscilloscope, DM504A Autoranging DMM, DC504 Counter/Timer
Stock: 1
USD $65
Tektronix 7A22 Differential Amplifier plugin
Stock: 1
USD $40
Tektronix 670-1663-02 Type 485 Sweep Replacement Board
Stock: 1
USD $29
Tektronixs P6062B Probe
9FT 1X 1MΩ 135pF 10X 10MΩ 17pF
Stock: 1
USD $69
Tektronixs P6139A Probe
500MHz 8.0pF 10MΩ 10X 1.3M
Stock: 1
USD $59
NEW Tektronixs P6129B 100 MHz 1X & 10X Passive Probe with readout
Stock: 1
USD $29
Tektronix P6062B Probe
9ft
1X 1MΩ 135pF
10x 10MΩ 17pF
Stock: 1
USD $49
Tektronix P6111B Probe
200MHz
15.OpF
10MΩ
10X 2 meter
Stock: 1
USD $20
These single bay units were designed to fit the TM5XX series frames, providing a convenient place to store leads, probes, and tools.
In the same category as a line cord for “must have”.
Stock: 2
USD $45
Compatible with both 500 series and 5000 series (programmable) Tektronix modules. Panels have seen some better days.
Stock: 1
USD $285
The Tektronix 2337 is a ruggedized portable dual-channel, 100 MHz analog scope. An A Ext connector (external signal to the A Trigger Generator) on the front panel, B Ext connector (external signal to the B Trigger Generator) on the front cover, and External Z-Axis connector at the rear round out its connectivity. The front cover also has a 3½ digit LCD for delta time (disconnects DMM from LCD readout), DC (up to 500 V), RMS AC (up to 350 V), and Ω (up to 20 MΩ) measurements, and B Trigger function.
Stock: 1
USD $250
The Tektronix 2235 is a 100 MHz dual-trace, dual-timebase portable scope.
Includes: Line cord, probes, reference guide, carrying strap
Stock: 1 ON HOLD
USD $10
Tektronix 1360S Switch Matrix
All Terminals 250 VDC MAX, 50 Ω
Serial no: B010475
Stock: 1
USD $18
Tektronix 119-1019-00 Power Divider
Stock: 1
USD $500
Tektronix 2247A 100MHz Oscilloscope Counter/Timer
Serial number: B030877
Line Voltage Range: 90-250V AC
Fuse 250V 2A Slow
Service manual available here
Stock: 1
USD $75
Tektronix P6108 Passive Probe 10X Probe with data sheets
Stock: 1
USD $450
Tektronix 2706 RF Preselector 9kHz – 1800 MHz. The Tektronix 2706 RF Preselector improves the flexibility and accuracy of your Spectrum Analyzer measurements, and is especially useful for EMI applications.
Manual available here
Specifications available here
Stock: 1
USD $35
Type 3A6 Dual-Trace Amplifier
Serial no: 013924
Data sheet available here
Stock: 1
USD $120
DC 5010 Programmable Universal Counter/Timer
Serial no: B052107
Stock: 1 on hold
USD $35
1434 Video Noise Generator
Serial No: B010221
Stock: 1 on hold
USD $1275
Tektronix 067-0587-01
Signal Standardizer Calibration Fixture
Data sheet available here
Stock: 1
USD $5
This blue vinyl pouch is designed to mount to selected Tektronix equipment for storing manuals, probes, cable, and documents. It measures 16″ x 14″ x 2″, with a metal plate on one side for mounting.
Stock: 5
USD $5
Designed to mount on top of a Tektronix scope, this two-compartment bag measures 10″ x 17″ x 2″, with a metal sheet on one side for mounting. It is made from a heavy-duty nylon, and is large enough to keep probes and manuals with the scope.
Stock: 1
USD $25
Standard red and black multimeter test leads from Tektronix, no longer in production.
Stock: 1
USD $25
These are standard red and black electrical test leads: 26 Awg, 1200Mm L, 1Kv
Stock: 1
USD $69
The P6058 is a combination 1x DC voltage and temperature measuring device, rated up to 500V. It is designed for use with digital multimeters and plug-ins including the DM501, 7D13, and 7D12/M1, which have a 4-pin LEMO S-series connector for this probe. The temperature sensor is a diode-connected transistor. To measure temperatures, the hook tip is removed from the probe, exposing a ceramic tip connected thermally to the transistor case.
Stock: 1
USD $29
The P6062B is a passive switchable (x1, x10) probe for 1MO scope inputs. It has a readout pin that indicates selected attenuation, and a ground reference button.
Stock: 1
USD $35
The P6101 is a passive 15 MHz, x1, miniature modular probe for 1MO scope inputs.
Stock: 1
USD $44
The P6104 is passive 100 MHz, x10, miniature modular probe for 1MO scope inputs. This probe has a shorter cable than the P6105.
Stock: 1
USD $35
The P6104A is passive 100 MHz, x10, miniature modular probe for 1MO scope inputs. This probe has a shorter cable than the P6105.
Stock: 1
USD $35
The P6105 is passive 100 MHz, x10, miniature modular probe for 1MO scope inputs with a readout encoding pin.
Stock: 2
USD $75
The P6108A is a passive 100 MHz, x10, miniature modular probe for 1 MO scope inputs with a BNC connector and a readout encoding pin.
Stock: 1
USD $35
The P6109 is a 150 MHz x10, 3 m passive probe for scopes like the 2252 with 1 MO inputs. It has a BNC plug witha readout pin.
Stock: 6
USD $35
The P6120 is a 60MHz x10, passive miniature probe, with a BNC connector without a readout pin.
Stock: 1
USD $45
The P6121 is a 100 MHz passive x10 probe designed for the 2236 scope. The P6122 is a general purpose variant.
Stock: 1
USD $29
The P6006 is a general-purpose probe designed for use with Tektronix DC to 33 MHz Oscilloscopes. The probe can be compensated to match all Tektronix Plug-Ins and Oscilloscopes with input capacitances of 15 pF to 47 pF and input resistance of 1 MΩ
Stock: 2